RC4 WIRELESS LUMENDIM M2 Dimmer

The RC4 Wireless LumenDimM2 is miniature 2-channel wireless DMX dimmer for LEDs, lamps, and motors for use in small props, costumes, and more on the CRMX platform.   RC4 Flkr Effects Engine   DMX data in and out   RC4 HotPatch   16-bit dimming with multiple PWM frequencies   High-efficiency 6V-35VDC voltage input range   Spesifications   Dimensions:  3.14" x 1.57"  x  .787" (80mm x 40mm x 20mm)   Weight: 2.10oz   Power Input: 6VDC – 35VDC, 0.5W, screw terminals   Dimmer Outputs: 2 low-voltage DC dimmers, screw terminals, 19-bit resolution PWM (524,00 steps)   Output Power, per Dimmer: 10A non-continuous, 5A continuous   Maximum Total Power Handling: 16A (limited by safety rating of input screw terminals)   Multiple PWM frequencies: 77Hz (high power), 615Hz (flicker free), 5kHz (artifact free for video), 20kHz (noise free for audio), 40kHz (super-slow-motion video)   Multiple Dimmer Curves: Non-Dim, Non-Dim Inverted, Linear, Linear Inverted, Inverse-Square-Law (ISL), ISL inverted, servo motor pulse clockwise (CW), servo motor pulse counter-clockwise (CCW), AC wave (ring telephone bells)   DMX Input/Output: RC4 3.5mm mini, USITT DMX512/1990 data, non-standard port, connector adaptors available. RDM E1.20 and E1.37 (dimmer configuration) support   Wireless DMX Protocol: LumenRadio CRMX   RF Antenna: RP-SMA external, omnidirectional. Alternate antennas can be used for increased sensitivity and directionality